Electrical Fault Finding Melbourne
Intermittent electrical faults are the ones that get guessed at and never actually fixed. We isolate the fault systematically — circuit by circuit — so you get a diagnosis and a repair rather than a replaced part and a hopeful shrug.
- Licensed REC-38532
- Fully Insured
- 24/7 Emergency Callouts
- Melbourne Wide
What we cover
What our fault finding & repairs service includes
Not sure whether your job fits? Get in touch and we will tell you plainly.
- Tripping circuit breaker and safety switch diagnosis
- Dead circuit and loss of power investigation
- Intermittent fault tracing
- Faulty powerpoint, switch and fitting repairs
- Lighting circuit faults
- Damaged or deteriorated cable location
- Appliance circuit isolation testing
- Insulation resistance and continuity testing
- Repair and make safe
Do you need this?
Signs it is time to call an electrician
If any of these sound familiar, it is worth getting looked at before it becomes a bigger job.
A safety switch trips at random with nothing obvious running
One room or circuit has no power but the rest of the house is fine
Lights flicker, buzz or fail across a whole circuit
A powerpoint works intermittently, or feels warm
The fault has already been 'fixed' once and came back
Fault Finding & Repairs
Get a quote for fault finding & repairs work
Tell us what is going on and send a photo if you can. We will come back to you with a clear quote before any work starts.
Pricing
What affects the cost
We do not publish fixed prices, because guessing at a number before seeing the job helps nobody. Here is what actually drives it.
- How long the fault takes to isolate
- How many circuits and fittings need testing
- Accessibility of the wiring — roof space, subfloor, concealed runs
- Whether the repair can be completed on the same visit
- Parts required for the repair
You get a quote first. We will talk through what the job involves and what it costs before we start, so there are no surprises on the invoice.
How it works
Four steps, no surprises
You'll know what the job involves and what it costs before we pick up a tool.
- 01
Contact us
Tell us what electrical work you need. A photo of the problem helps.
- 02
Discuss the job
We'll understand your requirements and give you practical advice.
- 03
Receive your quote
A clear quote for the work required, before anything starts.
- 04
Get the job done
We complete the work professionally and safely, and tidy up after ourselves.
Questions
Fault Finding & Repairs FAQs
Straight answers to what people ask us most about this service.
How do you charge for fault finding?
Fault finding is time-based because the cause isn't known until it's traced. We'll explain how we charge before we start, and once the fault is located we'll tell you what the repair involves before doing it.
Can you find a fault without pulling my house apart?
In almost all cases, yes. Faults are isolated by testing circuits at the switchboard and working outward, so access is targeted rather than exploratory.
My safety switch trips only sometimes. Is that still worth investigating?
Yes — an intermittent trip is still a real fault, often moisture ingress or a deteriorating appliance or cable. It generally gets worse, not better.
Related
Other services you might need
Emergency Callouts
Urgent faults, loss of power, burning smells and dangerous electrical problems.
View serviceSwitchboard Upgrades
Replace old fuses, add safety switches and get capacity for modern loads.
View serviceMaintenance
Inspections, switchboard checks and repairs that catch problems before they stop you.
View service